We are now able to offer an installation service for bridged or single Access point setup.
Bridging access points is very useful for larger buildings that require full coverage of a wireless network or buildings with metal objects embeded in the walls as a way of moving the radio around the problem this requires a minimum of 2 Wireless access points with a bridge capacity.
Single access Points are mainly used to add wireless capability to an existing wired network system.
The access points are not very big typically about A5 in size and approximately 2 cm tall although you still need to allow room for the aerial at the back most can be used wall mounted as well as free standing.
For our Last job this afternoon we are at a customers on Henry Street in Kenilworth, We are here to setup an access point system with a cable modem and a router.
Update : We managed to get it to work in the attic with a laptop and on a playstation 3 on the first floor all coming from one access point on the ground floor.
Good morning today we are at a customers on Main Street at Wolston in Warwickshire near Coventry, We are here to install a wireless bridge system of two access points, The main objective of this is to share the buildings internet connection in the office at the side of the house with with the rest of the building, We managed to do this using only 2 access points one which has to be wired to the main router and the other in a convenient location in the house on route to the areas requiring access.