Good afternoon we are now with a customer at Tile Hill in Coventry we are here because the customer requires to link there Apple iPhone 5 with an Apple Mac and a HP Photosmart 5520 Wireless printer (Air Print compatible)
last week we determined that the Apple Mac required updating to Snow Leopard and had ordered from apple unfortunately this was only available via post and not electronic download.
We installed the 10.6.4 supplied updated to 10.6.8 upgraded the itunes from version 9 to version 11 this allowed us to link the phone to the mac to enable syncing of music etc
Then we installed the HP Photosmart 5520 wireless printer on to the customers network and loaded the drivers on to the Apple Mac.
In the end the customer was easily able to transfer music between the Apple Mac computer and the iPhone 5 as well as being able to print direct from either to the HP Photosmart 5520 wireless network printer.
We are now able to offer an installation service for bridged or single Access point setup.
Bridging access points is very useful for larger buildings that require full coverage of a wireless network or buildings with metal objects embeded in the walls as a way of moving the radio around the problem this requires a minimum of 2 Wireless access points with a bridge capacity.
Single access Points are mainly used to add wireless capability to an existing wired network system.
The access points are not very big typically about A5 in size and approximately 2 cm tall although you still need to allow room for the aerial at the back most can be used wall mounted as well as free standing.
Good morning, We are with a customer on the Stoneleigh Road near Gibbet Hill in Coventry, We are here to set up a Netgear Wireless ADSL modem Router, and supply and install a wireless USB adaptor to make the customers computer work on a wireless network.
Good morning today we are at a customers on Main Street at Wolston in Warwickshire near Coventry, We are here to install a wireless bridge system of two access points, The main objective of this is to share the buildings internet connection in the office at the side of the house with with the rest of the building, We managed to do this using only 2 access points one which has to be wired to the main router and the other in a convenient location in the house on route to the areas requiring access.