Setting up a wireless router in Warwick

Good morning this morning we are in Warwick trouble shooting a wireless router installation, it seems one computer out of the devices here is not finding the wireless Router and we need to establish why.

Update Turns out the wireless router installed was set to auto and had choose channel 13 and for some reason the wireless card was set to US so was only able to see up to channel 11, reset to UK and all seems well plus removed a search bar from the computer.

Wireless printer installation at Warwick

Good morning today we are starting in Warwick to setup a HP wireless printer on a replaced wireless router for a customer.

This needed the HP wireless inkjet printer setting up to work with the BT router which required the printer to be attached via a USB cable to transfer the settings details (some of the HP Wireless printers allow you to enter the details directly on the LCD), and Then reconfiguring the laptop and 2 net books to work with it.

Wireless Trouble in Warwick

In warwick today my only job is to reset the settings on a Belkin Router, then make a desktop PC work with it the first problem is its running Windows XP and its existing Wireless Card does not cope with WPA security, so we disabled the original Wireless Card and added a new Wireless USB adaptor that supports XP. all tested and working with all devices.

Installing a Wireless Bridge Access Point System in Warwick

Today we are in Warwick just off of the Myton Road with Aztec Design installing a Wireless Bridge system of two Access Points, The main objective of this is to share the Buildings Internet connection in the office on the side of the house with with the rest of the building, We managed to accomplish this using only 2 access points one which has to be wired to the main router and the other in a strategic location in the centre of the house on route to the room requiring access.

Access Point setup / Wireless Bridge Installations

We are now able to offer an installation service for bridged or single Access point setup.

Bridging access points is very useful for larger buildings that require full coverage of a wireless network or buildings with metal objects embeded in the walls as a way of moving the radio around the problem this requires a minimum of 2 Wireless access points with a bridge capacity.

Single access Points are mainly used to add wireless capability to an existing wired network system.

The access points are not very big typically about A5 in size and approximately 2 cm tall although you still need to allow room for the aerial at the back most can be used wall mounted as well as free standing.

Wireless Access Point Installation and other Network Issues in Warwick

We are now with a customer on the Blacklow Road in Warwick, We are here to Support a customer with a Wireless Connectivity issue, The problem is that the cable modem and the Router are in a study room upstairs but the customer would like to be able to wirelessly use the internet in the lounge downstairs and connect a computer via cable in an upstairs room, To solve this we connect the Cable modem and Router to the PC upstairs as normal, The house already has fitted a network cable with a socket next to the router upstairs and another socket in the hall next to the lounge downstairs as well as a cable and socket to feed the bed room , We connect a short network RJ45 fly lead between the socket and the router upstairs, Downstairs we attach a Switch which allows us to share between the Bedroom upstairs and a Netgear Access Point to allow us to wirelessly connect in the lounge.